Quality Control
Quality Built Into Every WPC System
From the factory inspection lab and production lines to final packing, MexyTech supports quality control with documented checks and product-performance evidence. Relevant reports and specifications are available for the selected product system and market requirement.
Quality Control From Production to Release
Quality is managed as a closed loop—not a final check alone. We inspect key stages during production, verify finished products and test selected samples before an order is cleared for shipment.
01
Samples are checked during extrusion for key product characteristics, including dimensions, color consistency, surface appearance and installation fit.
02
After processing, we review finish quality, texture detail, cutting and overall appearance before products move to final inspection.
03
Finished boards and accessories are sampled for conformity with the approved product drawing, visual standard and packing requirements.
Testing & Sampling
Inspection Backed by Product Testing
Our inspection process combines visual and dimensional checks with product testing for selected samples. The test scope is matched to the product type and quality requirement.
- Each order follows the applicable inspection plan, with sampling or full inspection determined by the order type and quantity
- New products, new molds and first orders with a new supplier receive additional inspection attention
- Selected samples may undergo boiling-water, aging, performance or other product-specific testing before release
- For tested decking samples, available performance documentation can cover water absorption, slip resistance, impact, flexural and freeze-thaw performance
What We Have Put Into Practice
Quality Control Evidence From Real Operations
MexyTech’s quality approach is supported by repeatable inspection steps, product testing records and release decisions—not only by a final visual check.
Multi-Stage Inspection
Inspection is carried out during extrusion, after post-processing and again on finished products before shipment coordination.
Test-Backed Product Evidence
Selected WPC decking samples have supporting performance data covering water absorption, slip resistance, impact, flexural and freeze–thaw testing.
Release and Re-Inspection
Orders requiring sorting, rework or corrective action are followed up and re-inspected before they are cleared for shipment.
Reference Test Data
Indicative Performance Data from Tested WPC Decking Samples
The following figures are approximate reference values from selected MexyTech WPC decking samples tested under specified laboratory methods. They help project teams understand the type of performance documentation available—not a universal guarantee for every product, profile or production batch.
≈ 0.5%
Water absorption
24-hour immersion reference
R10
Slip resistance
Oil-wet ramp reference
≈ 0.9–1.0 m
Impact resistance
Falling-weight reference
≈ 27–29 MPa
Flexural strength
Tested sample reference
3 cycles
Freeze–thaw test
Conditioning reference
Important: Actual results depend on the product system, formulation, profile, sample condition and applicable test standard. Request the complete test report for the exact product under consideration.
Clear Decisions Before Shipment
Inspection findings are graded against the approved product standard. Orders may be cleared, released with a documented warning, or held for sorting, corrective action and re-inspection before shipment.
Pass or Conditional Release
Only orders assessed as conforming—or approved for documented conditional release—move forward to shipment coordination.
Corrective Action & Re-Inspection
Where results require full sorting or rework, the order is followed up and re-inspected before release.
Documents for Your Market
Request available certificates, test reports and product specifications relevant to your selected system and market requirement.